Material Weight Reference
Comprehensive searchable database of construction material weights and densities. Includes concrete, masonry, metals, timber, finishes, insulation, glass, and roofing materials with unit weights in kg/m³ and kg/m².
56
Total Materials
9
Categories
Download Complete Database
Get all material weights in Excel format for offline use
Reference database of construction material weights. Values shown as density (kg/m³) for volumetric materials or unit weight (kg/m²) for surface materials.
| Material | Value | Unit |
|---|---|---|
| Normal Weight Concrete | 2,400 | kg/m³ |
| Lightweight Concrete | 1,800 | kg/m³ |
| Heavyweight Concrete | 3,200 | kg/m³ |
| Reinforced Concrete (2%) | 2,500 | kg/m³ |
| Lean Concrete | 2,200 | kg/m³ |
| Material | Value | Unit |
|---|---|---|
| Common Brick | 1,920 | kg/m³ |
| Engineering Brick | 2,200 | kg/m³ |
| Concrete Block (Hollow) | 1,100 | kg/m³ |
| Concrete Block (Solid) | 2,000 | kg/m³ |
| AAC Block | 600 | kg/m³ |
| Natural Stone | 2,500 | kg/m³ |
| Material | Value | Unit |
|---|---|---|
| Steel | 7,850 | kg/m³ |
| Stainless Steel | 8,000 | kg/m³ |
| Aluminum | 2,700 | kg/m³ |
| Cast Iron | 7,200 | kg/m³ |
| Copper | 8,900 | kg/m³ |
| Brass | 8,500 | kg/m³ |
| Material | Value | Unit |
|---|---|---|
| Softwood (Pine) | 500 | kg/m³ |
| Softwood (Spruce) | 450 | kg/m³ |
| Hardwood (Oak) | 750 | kg/m³ |
| Hardwood (Teak) | 700 | kg/m³ |
| Plywood | 600 | kg/m³ |
| MDF | 750 | kg/m³ |
| Particleboard | 700 | kg/m³ |
| Material | Value | Unit |
|---|---|---|
| Ceramic Tiles (10mm) | 20 | kg/m² |
| Porcelain Tiles (10mm) | 22 | kg/m² |
| Marble (20mm) | 54 | kg/m² |
| Granite (20mm) | 52 | kg/m² |
| Terrazzo (25mm) | 65 | kg/m² |
| Gypsum Plaster (12mm) | 12 | kg/m² |
| Cement Plaster (15mm) | 30 | kg/m² |
| Render (20mm) | 40 | kg/m² |
| Material | Value | Unit |
|---|---|---|
| Glass Wool | 24 | kg/m³ |
| Rock Wool | 100 | kg/m³ |
| XPS Board | 35 | kg/m³ |
| EPS Board | 20 | kg/m³ |
| Polyurethane Foam | 40 | kg/m³ |
| Perlite | 100 | kg/m³ |
| Material | Value | Unit |
|---|---|---|
| Float Glass (4mm) | 10 | kg/m² |
| Float Glass (6mm) | 15 | kg/m² |
| Float Glass (10mm) | 25 | kg/m² |
| Float Glass (12mm) | 30 | kg/m² |
| Laminated Glass (6+6) | 30 | kg/m² |
| Double Glazed (6+12+6) | 35 | kg/m² |
| Triple Glazed | 50 | kg/m² |
| Material | Value | Unit |
|---|---|---|
| Metal Deck (0.5mm) | 5 | kg/m² |
| Metal Deck (0.7mm) | 8 | kg/m² |
| Concrete Tiles | 45 | kg/m² |
| Clay Tiles | 55 | kg/m² |
| Slate | 50 | kg/m² |
| Bitumen Membrane | 5 | kg/m² |
| EPDM Membrane | 2 | kg/m² |
| Material | Value | Unit |
|---|---|---|
| Bitumen Sheet (3mm) | 4 | kg/m² |
| Bitumen Sheet (4mm) | 5 | kg/m² |
| PVC Membrane | 2 | kg/m² |
| Liquid Membrane | 2 | kg/m² |
Notes:
- kg/m³ (density): Weight per cubic meter - use for volume calculations
- kg/m² (unit weight): Weight per square meter - use for area-based materials
- Values are typical/average - actual may vary by manufacturer
- For structural calculations, verify with material specifications
- Reinforced concrete includes ~2% steel reinforcement by volume
REFERENCE INFORMATION
This tool provides standard reference data compiled from industry sources.
Note:
• Data is provided for quick reference and may not reflect the most current standards or specifications.
About This Calculator
The Material Weight Reference provides structural engineers, architects, and quantity surveyors with a comprehensive database of construction material weights and densities used across UAE and Gulf projects. Look up unit weights for dead load calculations, material takeoffs, and structural analysis. Covers concrete, masonry, metals, timber, finishes, insulation, glass, and roofing materials with values in both kg/m³ and kg/m² formats.
When to Use This Calculator
- Calculating dead loads for structural analysis and design
- Estimating material quantities by weight for procurement
- Verifying load assumptions in structural calculations
- Preparing weight-based cost estimates for heavy materials
- Cross-checking material specifications against standard densities
How to Use This Calculator
Select Material Category
Choose from concrete, masonry, metals, timber, finishes, insulation, glass, or roofing.
Browse or Search
Scroll through the category or use search to find specific materials.
View Unit Weights
See density in kg/m³ for volumetric materials or kg/m² for sheet/area materials.
Apply to Calculations
Use the values in structural dead load calculations or quantity estimates.
Typical Scenarios in UAE & Gulf Projects
Structural engineer calculates total dead load on foundation by looking up unit weights of reinforced concrete slabs, masonry partitions, marble finishes, and MEP systems. Accurate weights ensure proper foundation sizing for sandy Gulf soil conditions.
Quantity surveyor converts volumetric concrete and steel quantities to tonnage for shipping cost estimates. Material weights help coordinate crane capacity requirements and transport logistics for large infrastructure projects.
Frequently Asked Questions
Take Your Calculations Further
This calculator reflects the logic built into Arkan's construction management platform.
Last Updated: January 2026
Standards Reference: BS EN 1991-1-1 Eurocode 1, ASCE 7 Minimum Design Loads, ACI 318