العربية

Carpet Calculator: How Much Roll Carpet Do I Need

Calculate carpet, vinyl, and roll flooring requirements. Account for roll widths, pattern repeats, seam placement, and waste percentage.

Last updated: January 2026

Units
Room Dimensions
Carpet Specifications

Common widths: 3.66 m, 4 m

Carpet Requirements

Room Area

60

m²

Carpet Required

84

m²

Installation Details
Total Length Needed21 m
Rolls Required1 rolls
Seam Length10 m
Waste Area24 m²
Waste Percentage40%
Layout Suggestion

2 strips running lengthwise

Your results
Email me this calculation
Leave your email and phone number and the Arkan team will send you this calculation. The calculator stays free and needs no sign-up.

We use your email and phone number to send this calculation and follow up on it. See our Privacy Policy.

ESTIMATION NOTICE

This calculator provides APPROXIMATE QUANTITIES for budgeting and planning purposes.

Please note:

• Wastage is included only where the tool says so. Actual waste varies with site conditions, workmanship, and material quality.

Embed this calculator on your site

Paste this snippet into your page. The embedded calculator is free to use and links back to this page.

About This Calculator

The Carpet & Roll Flooring Calculator helps contractors and interior designers estimate broadloom carpet, vinyl sheeting, and roll flooring materials for commercial and residential projects across the UAE and Gulf. For a rectangular room it calculates the number of strips, roll length with pattern-repeat allowance and waste factor, seam length and waste percentage.

Formula

Strips = room width ÷ roll width, rounded up

Length per strip = room length (or, with pattern matching, room length rounded up to a whole number of pattern repeats)

Total length = strips × length per strip × (1 + waste %)

Carpet area = total length × roll width; waste area = carpet area − room area

Seam length = (strips − 1) × room length

Rolls = total length ÷ 25 m, rounded up

Worked example

10 m × 6 m room, 4 m wide roll, 5% waste

Inputs

  • Room 10 m × 6 m (60 m²)
  • Roll width 4 m, no pattern matching
  • Waste allowance 5%

Steps

  1. Strips = 6 ÷ 4 = 1.5, rounded up to 2
  2. Total length = 2 × 10 × 1.05 = 21 m
  3. Carpet area = 21 × 4 = 84 m²; waste area = 84 − 60 = 24 m² (40%)
  4. Seam length = (2 − 1) × 10 = 10 m
  5. Rolls = 21 ÷ 25 = 0.84, rounded up to 1

Result: 21 m of 4 m wide carpet (84 m²) with one 10 m seam; the roll width leaves 24 m² of waste.

Assumptions and limits

  • Strips run along the room length and are laid full width of the roll. Strips are not rotated or split to reuse offcuts, so the real waste can be lower with a careful layout.
  • The waste percentage is applied to the total strip length, on top of the waste that comes from the roll width.
  • A roll is assumed to be 25 m long. Confirm roll lengths and any minimum order with your supplier.
  • Pattern matching rounds each strip up to a whole number of pattern repeats. Drop or offset patterns may need more.
  • Doorways, alcoves, stairs, borders and underlay are not included.

When to Use This Calculator

  • Estimating carpet quantities for hotel guestroom fit-outs
  • Planning vinyl flooring for healthcare or education facilities
  • Calculating broadloom carpet for large office floor plates
  • Comparing roll widths by seam length and waste
  • Verifying flooring subcontractor material takeoffs

How to Use This Calculator

1

Enter Room Dimensions

Input the room length and width. Strips run along the length.

2

Set Roll Width

Enter the roll width, e.g. 3.66 m or 4 m for broadloom, 2 m for vinyl sheet. Rolls are assumed to be 25 m long.

3

Add Pattern Repeat

If the pattern must match, enter the repeat; each strip is rounded up to whole repeats.

4

Set Waste Factor

Enter your own waste percentage for cutting and trimming.

5

Review Quantities

Get the number of strips, total length, area ordered, seam length and waste percentage.

Typical Scenarios in UAE & Gulf Projects

Hotel Guestroom in Dubai

An 8 m × 3.8 m guestroom in patterned broadloom from a 4 m roll, with a 0.6 m pattern repeat and 5% waste. The calculator gives a single strip with no seam: 8.82 m of roll, 35.28 m² ordered for a 30.4 m² room (16.1% waste). Repeat per room type and total the lengths for the order.

Hospital Ward in Abu Dhabi

A 20 m × 9 m (180 m²) ward in 2 m sheet vinyl with 8% waste. The calculator gives 5 strips, 108 m of roll (216 m², 20% waste including the part-width fifth strip) and 80 m of seams to be heat-welded for hygiene.

Frequently Asked Questions

What roll widths are standard for commercial carpet?

Common roll widths include 3.66 m (12 ft) and 4 m for broadloom carpet, and 2 m or more for vinyl sheet. Roll widths vary by product and supplier, so confirm with the manufacturer. The calculator lets you enter the roll width you will buy.

How much waste should I allow for patterned carpet?

The waste percentage is an input you set from your own records for similar work. It is affected by the roll width, the pattern repeat and how regular the room is. The calculator applies the percentage you enter to the total length.

Where should carpet seams be placed?

Agree the seam positions with the supplier or installer and document them on the shop drawings for approval.

Last Updated: January 2026

Standards Reference: Reference only: strip layout and waste from the inputs you enter; the calculator does not check installation standards

Do this inside Arkan

A calculator gives you one number. Arkan keeps the quantities, inspections and payment requests for the whole project in one place, in English and Arabic.

Arkan screen: boq

Need More Than Calculators?

Arkan brings all your construction management together: BOQ tracking, payment certificates, document management, scheduling, and more. All integrated. All in one place.

We Value Your Privacy

We use cookies to enhance your browsing experience, analyze site traffic, and personalize content. By clicking "Accept All", you consent to our use of cookies. Read our Privacy Policy

If you allow Marketing Cookies, OpenAI Ads measures accepted demo requests and relates them to advertising using browser and page signals. When enabled, automatic matching may use hashed contact details. You can withdraw permission in Cookie settings. Your enquiry will still be sent if you reject marketing cookies.