Scaffolding Calculator
Calculate scaffolding quantities for construction projects. Estimates standards, ledgers, transoms, platforms, ties, and total weight for tube & fitting or system scaffolds.
Perimeter: 100 m | Facade Area: 1500 m²
Bay spacing: 2m | Lift height: 2m
| Class | Capacity | Use |
|---|---|---|
| Light Duty (0.75 kN/m²) | 0.75 kN/m² | |
| Medium Duty (1.5 kN/m²) | 1.5 kN/m² | |
| Heavy Duty (2.0 kN/m²) | 2 kN/m² | |
| Special Duty (3.0 kN/m²) | 3 kN/m² |
- Scaffolding must be designed by competent person
- Weekly inspection required per BS EN 12811
- Tag system required for inspection status
- Ties required at maximum 4m vertical, 6m horizontal
Working Area
1600
Standards
102
Total Weight
22.2
Standards (Verticals)
102
Ledgers (Horizontals)
900
Transoms (Cross)
450
Braces (Diagonal)
400
Total Scaffold Weight
22,156 kg
22.16 tonnes
Working Platform Area
1600 m²
All lift levels combined
- Scaffold must be inspected before first use and after any alterations
- Competent scaffolder required for erection and dismantling
- Ladder access bays should be at maximum 30m intervals
Notes:
- Quantities are estimates for budgeting purposes
- Actual design must be done by scaffolding designer
- Add 10-15% contingency for couplers and fittings
- Consider access requirements and loading points
- Comply with local regulations (UAE, BS EN 12811)
IMPORTANT DISCLAIMER
This calculator provides PRELIMINARY ESTIMATES ONLY and is intended for planning and budgeting purposes. Results should NOT be used for final structural design or construction without verification by a licensed Professional Engineer (PE) or Chartered Engineer (CEng).
By using this tool, you acknowledge that:
1. All calculations are indicative and may not account for site-specific conditions, load combinations, or local code requirements.